First, the working head with the sealing tank cover can be raised quickly by the hydraulic system. After filling the mobile tank with raw material, the working head then rapidly moves down into the tank. A ring of snap fasteners around the reactor is responsible for tightening the reactor cover on the working head of the high concentration coaxial mixer to the tank and achieving a seal.

During the mixing process of high viscosity materials, air may also come into the liquid and forms bubbles which are difficult to remove. This problem may affect the mixing effect and the quality of the finished products. Therefore, there is a vacuum pipeline on the high viscosity coaxial vacuum mixer tank cover connected to a high efficiency vacuum pump. When the vacuum pump is working, most of the air will be removed from the reactor, thus avoiding the formation of air bubbles or floating foam during the mixing process.

Afterwards, the fast dispersion and low speed anchor mixer will work in sequence. The disperser blade rotates at a very high speed. During the process, the high-speed disperser blade will shear and strongly disperse the solid material into the surrounding liquid. Followed by the anchor mixer with high torque driven by a gearbox to mix the high viscosity material evenly. In the mixing process, the scrapers around the anchor mixer can scrape any medium attached to the inner wall of tank.

Furthermore, heating or cooling is necessary for mixing of many raw material types. Therefore, there is a jacket on the tank that can be connected with hot oil or cooling water to achieve heating or cooling function. On the tank cover, there are also some pipe inlets for addition adds and a viewing window to observe the mixing status inside the reactor at any time.